7 Replies Latest reply: Feb 15, 2010 10:34 PM by genaganna RSS

CAL, failing to run OpenCL, FGLRX [Ubuntu 9.10 AMD64]

basile.starynkevitch Newbie
Currently Being Moderated
OpenCL Ubuntu 9.10

Hello All,

 

I have trouble running OpenCL from ATI stream sdv v2.01 on Linux/Ubuntu/Karmic/AMD64 (2.6.31-20-generic kernel). I have an ATI 5770 card with two screens in dual-head.

I did install the FGLRX driver (file ati-driver-installer-10-1-x86.x86_64.run downloaded & run), since /var/log/Xorg.0.org contains notably

I did install the ati-stream-sdk-v2.01-lnx64 under /usr/local and I added all symlinks inside /usr/local and /usr/lib/openCL/vendors

 

lrwxrwxrwx 1 root root 63 2010-02-14 19:45 /usr/lib/OpenCL/vendors/libatiocl64.so -> /usr/local/ati-stream-sdk-v2.01-lnx64/lib/x86_64/libatiocl64.so

lrwxrwxrwx  1 root root        63 2010-02-14 19:43 /usr/local/lib/libatiocl64.so -> /usr/local/ati-stream-sdk-v2.01-lnx64/lib/x86_64/libatiocl64.so
lrwxrwxrwx  1 root root        59 2010-02-14 19:43 /usr/local/lib/libGLEW.so -> /usr/local/ati-stream-sdk-v2.01-lnx64/lib/x86_64/libGLEW.so
lrwxrwxrwx  1 root root        59 2010-02-14 19:43 /usr/local/lib/libglut.so -> /usr/local/ati-stream-sdk-v2.01-lnx64/lib/x86_64/libglut.so
-rwxr-xr-x  1 root root     89757 2009-12-29 09:39 /usr/local/lib/libikvm-native.so
lrwxrwxrwx  1 root root        61 2010-02-14 19:43 /usr/local/lib/libOpenCL.so -> /usr/local/ati-stream-sdk-v2.01-lnx64/lib/x86_64/libOpenCL.so

 

I did set the environment variables appropriately. ATISTREAMSDKSAMPLESROOT=/usr/local/ati-stream-sdk-v2.01-lnx64/
ATISTREAMSDKROOT=/usr/local/ati-stream-sdk-v2.01-lnx64/

the shared libraries are accessible since ldconfig was run and /usr/local/lib is in /etc/ld.so.conf

ldd /usr/local/ati-stream-sdk-v2.01-lnx64/samples/opencl/bin/x86_64/HelloCL
    linux-vdso.so.1 =>  (0x00007fffb072e000)
    libpthread.so.0 => /lib/libpthread.so.0 (0x00007f1ffeff7000)
    libdl.so.2 => /lib/libdl.so.2 (0x00007f1ffedf3000)
    libOpenCL.so => /usr/local/lib/libOpenCL.so (0x00007f1ffebed000)
    libstdc++.so.6 => /usr/local/lib64/libstdc++.so.6 (0x00007f1ffe8ea000)
    libm.so.6 => /lib/libm.so.6 (0x00007f1ffe666000)
    libgcc_s.so.1 => /usr/local/lib64/libgcc_s.so.1 (0x00007f1ffe450000)
    libc.so.6 => /lib/libc.so.6 (0x00007f1ffe0e1000)
    /lib64/ld-linux-x86-64.so.2 (0x00007f1fff213000)
    librt.so.1 => /lib/librt.so.1 (0x00007f1ffded9000)

But HelloCL fails

./HelloCL
HelloCL!
Getting Platform Information
Segmentation fault

and ldd /usr/local/ati-stream-sdk-v2.01-lnx64/samples/cal/bin/x86_64/hellocal
    linux-vdso.so.1 =>  (0x00007fff9496b000)
    libpthread.so.0 => /lib/libpthread.so.0 (0x00007f0a32cf6000)
    libdl.so.2 => /lib/libdl.so.2 (0x00007f0a32af2000)
    libaticalrt.so => /usr/lib/libaticalrt.so (0x00007f0a32fed000)
    libaticalcl.so => /usr/lib/libaticalcl.so (0x00007f0a329d4000)
    libstdc++.so.6 => /usr/local/lib64/libstdc++.so.6 (0x00007f0a326d1000)
    libm.so.6 => /lib/libm.so.6 (0x00007f0a3244d000)
    libgcc_s.so.1 => /usr/local/lib64/libgcc_s.so.1 (0x00007f0a32237000)
    libc.so.6 => /lib/libc.so.6 (0x00007f0a31ec8000)
    /lib64/ld-linux-x86-64.so.2 (0x00007f0a32f12000)
    librt.so.1 => /lib/librt.so.1 (0x00007f0a31cc0000)
    libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f0a31aae000)
    libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f0a31778000)
    libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f0a31575000)
    libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f0a31359000)
    libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f0a31154000)

but

/usr/local/ati-stream-sdk-v2.01-lnx64/samples/cal/bin/x86_64/hellocal
Supported CAL Runtime Version: 1.3.185
Found CAL Runtime Version: 1.4.519
Use -? for help
Segmentation fault

Any help is welcome.

 

Regards

 

--

Basile Starynkevitch (from France)

X.Org X Server 1.6.4 Release Date: 2009-9-27 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu Current Operating System: Linux glinka 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:02:26 UTC 2010 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=5e526171-aff8-4609-b996-fdf9953bd72b ro quiet splash Build Date: 14 November 2009 05:48:57PM xorg-server 2:1.6.4-2ubuntu4.1 (buildd@) (--) PCI:*(0:1:0:0) 1002:68b8:1002:2543 ATI Technologies Inc rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/131072, I/O @ 0x00008000/256, BIOS @ 0x????????/131072 (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.4.0, module version = 1.0.0 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.4.99.906, module version = 8.69.4 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so (II) ATI Proprietary Linux Driver Version Identifier:8.69.4 (II) ATI Proprietary Linux Driver Release Identifier: 8.69 (II) ATI Proprietary Linux Driver Build Date: Dec 11 2009 14:56:51 (II) Primary Device is: PCI 01@00:00:0 (II) Loading PCS database from /etc/ati/amdpcsdb (--) Chipset Supported AMD Graphics Processor (0x68B8) found (--) Chipset Supported AMD Graphics Processor (0x68B8) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 9, (OK) ukiOpenByBusid: ukiOpenMinor returns 9 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series" (Chipset = 0x68b8) (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x2543) (--) fglrx(0): board vendor info: original ATI graphics adapter (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000 (--) fglrx(0): MMIO registers at 0xf5000000 (--) fglrx(0): I/O port at 0x00008000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 12.12 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: JUNIPER (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000300, disabled=0x00000000 (II) fglrx(0): Connected Display1: DFP 3 [dfp3] (II) fglrx(0): Display1 EDID data --------------------------- (II) fglrx(0): Manufacturer: SAM Model: 27d Serial#: 1296380464 (II) fglrx(0): Year: 2008 Week: 7 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (**) fglrx(1): Depth 24, (--) framebuffer bpp 32 (II) fglrx(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(1): Default visual is TrueColor (==) fglrx(1): RGB weight 888 (II) fglrx(1): Using 8 bits per RGB (==) fglrx(1): Buffer Tiling is ON (copy from primary) (--) fglrx(1): Chipset: "ATI Radeon HD 5700 Series" (Chipset = 0x68b8) (--) fglrx(1): (PciSubVendor = 0x1002, PciSubDevice = 0x2543) (--) fglrx(1): board vendor info: original ATI graphics adapter (--) fglrx(1): Video RAM: 1048576 kByte, Type: GDDR5 (II) fglrx(1): board/chipset is supported by this driver (original ATI board) (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906 (WW) fglrx(0): could not detect X server version (query_status=-1) (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0xa15000 (II) fglrx(0): [uki] mapped SAREA 0xa15000 to 0x7f63d84a5000 (II) fglrx(0): [uki] framebuffer handle = 0xa16000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.69.4 (II) fglrx(0): Date: Dec 11 2009 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.31-20-generic (II) fglrx(0): Build-Kernel MODVERSIONS: yes (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00a17000 (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf01040000 FBMappedSize: 0x010a0000 (II) fglrx(0): FBMM initialized for area (0,0)-(1792,2432) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1792 x 640 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (II) Loading extension ATITVOUT (**) fglrx(0): DPMS enabled (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/modules//amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.4.99.906, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): Composite extension is not loaded (WW) fglrx(0): Option "VendorName" is not used (WW) fglrx(0): Option "ModelName" is not used (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (==) fglrx(0): Using software cursor (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (II) fglrx(0): User Preference Output DFP4 using refresh rate 60.0 Hz. (--) RandR disabled (II) fglrx(1): driver needs X.org 1.4.x.y with x.y >= 99.906 (WW) fglrx(1): could not detect X server version (query_status=-1) (II) fglrx(1): doing swlDriScreenInit (II) fglrx(1): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 13, (OK) ukiOpenByBusid: ukiOpenMinor returns 13 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(1): [uki] DRM interface version 1.0 (II) fglrx(1): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(1): [uki] added 8192 byte SAREA at 0xa15000 (II) fglrx(1): [uki] mapped SAREA 0xa15000 to 0x7f63d82ad000 (II) fglrx(1): [uki] framebuffer handle = 0xa16000 (II) fglrx(1): [uki] added 1 reserved context for kernel (II) fglrx(1): swlDriScreenInit done (II) fglrx(1): Display width adjusted to to 1792 due to alignment constraints (II) fglrx(1): DRI initialization successfull! (II) fglrx(1): FBADPhys: 0xf0000c000 FBMappedSize: 0x00e00000 (II) fglrx(1): FBMM initialized for area (0,0)-(1792,2048) (II) fglrx(1): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption) (II) fglrx(1): Largest offscreen area available: 1792 x 256 (==) fglrx(1): Backing store disabled (II) fglrx(1): DPMS enabled (**) fglrx(1): Textured Video is enabled. (II) fglrx(1): GLESX enableFlags = 94 (II) fglrx(1): Using XFree86 Acceleration Architecture (XAA) (II) fglrx(1): GLESX is enabled (II) fglrx(1): Composite extension is not loaded (II) fglrx(1): X context handle = 0x2 (II) fglrx(1): [DRI] installation complete (==) fglrx(1): Silken mouse enabled (==) fglrx(1): Using HW cursor of display infrastructure! (==) fglrx(1): Using software cursor (II) fglrx(1): Disabling in-server RandR and enabling in-driver RandR 1.2. (II) fglrx(1): User Preference Output DFP3 using refresh rate 60.0 Hz. (II) AIGLX: Loaded and initialized /usr/X11R6/lib64/modules/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) AIGLX: Loaded and initialized /usr/X11R6/lib64/modules/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 1 (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments (II) fglrx(1): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

More Like This